Professional Tips and Tricks for Installing a New Shower Unit

Professional Tips and Tricks for Installing a New Shower Unit

Blog Article

Call Today

We've noticed the article about Simple ways to Install a Shower Cubicle on Your Own directly below on the web and think it made perfect sense to discuss it with you on this page.

An effective shower setup requires mindful preparation as well as a great deal of work. Most of the times, you will require to do 3 types of jobs: mounting walls, setting up the plumbing, as well as ending up walls.

Preparation

First of all, you have to decide on the kind of shower that you want to set up. It is necessary to ascertain whether the chosen shower is capable of dealing with specific systems as well as can control a risk-free level of water through the boiler. Many shower units nowadays are designed to be flexible to various water stress (such as kept hot water and cool mains).
It is also crucial to consider the water stress and also the planning of the piping and drain for the shower

Different Types of Shower Units

Push-on Mixer: The pipe as well as spray parts of the push-on mixer shower system can be attached to the bathroom tap according to your need, and also the water temperature level can be readjusted using the faucets. Push-on mixers are cheap as well as extremely simple to mount. Nevertheless, although the hose pipe link is basic, it is quickly displaced. Furthermore, it is inconvenient to readjust the temperature.

Bath/Shower Mixer: The tube and spray of this kind of shower are incorporated with a bath mixer faucet, and the temperature can be changed via the bathroom taps. It is a very affordable alternative and no additional plumbing is included. Nevertheless, the bath/shower mixers additionally deal with bothersome temperature level control alternatives.

Guidebook Mixer: The tube and spray of a hands-on mixer shower system belong of the wall surface device and the hot and cold water products are attached to a solitary valve The temperature level and also pressure of the water are controlled via either one or a selection of knobs (in more pricey showers). Although temperature control is a lot easier in hands-on mixer kinds, they are extra pricey than the previously mentioned mixers. They also need extra plumbing of hot and cold supply of water pipes.

Thermostatic Mixer: The tube and spray of this shower type belong of the wall device as well as the cold and hot water supplies are connected to a single shutoff below too. It is total with an integrated stabiliser to self-adjust the water temperature level as well as to avoid it from coming to be also warm. Among the biggest advantages of a thermostatic mixer shower type includes convenient temperature control. However, it is the most expensive of the different mixer options.

Power Shower: A power shower is a single unit containing an effective electrical pump that is capable of modifying both the water stress and also temperature level. This sort of shower can be fitted if there is water system from a cold water tank as well as a hot water cylinder. A power shower makes the adjustment of both stress as well as temperature level very easy. On the other hand, it is unsuitable for water heated directly by the shower or where the water is provided by a mix boiler under keys stress.

Electric Shower: An electric shower is plumbed right into a mains cold water supply and also it heats up the water electrically. It is essential to keep in mind that for this shower type to be set up, the keys pressure requires to be at least 0.7 kg/sq centimeters (10lb/sq in). The device permits the temperature level and also pressure to be adjusted by means of a handle. Versions with temperature level stabilisers are much better as they stay untouched by various other faucets somewhere else in operation within the house. A significant drawback of electrical showers is that the control handle just permits the option of high temperatures at much less stress, or lower temperatures at a greater stress. This is troublesome in the winter season when the spray is frequently weak and the keys water is chillier. Nevertheless, this trouble is dealt with in some models which are offered with a winter/summer setup.

Approach

Relying on the type of shower you wish to set up, the shower head should either be suited order to avoid its contact with the water in the bath below or the base tray, or it must have a check valve.
Prior to starting, it is suggested to note the placements of the shower head as well as control, and to intend the pipe-work included. In addition, the drain system to get rid of the waste water will certainly require to be planned. Both settings of the wire route as well as the shower button will certainly also need to be taken into consideration if an instant or electric shower system is being mounted.
Make use of the instruction guide given with the shower system to fit the shower control.Before suitable the pipes that will supply the water to the shower system, it is very important to cut off the water. In order to shield the pipes, they need to be provided a water-proof covering and additionally fitted with separating valves. The pipes can then be hidden into the wall surface and glued over to neaten the overall appearance.
Fit the base tray, shower head, as well as fittings.
Attach the primary shower control to the pipelines that will certainly be supplying the water (This may call for a female screw thread adapter).
Reconnect the water supply and examination the pipelines for any kind of leaks, as some may require tightening up.
If you are installing an electrical shower, remember to switch off the electricity supply prior to making any type of electric links. When these links have actually been made (there should be assistance within the user's manual), the power supply can be changed back on.

Readjusting Water Pressure to Fit Your Shower

The cold water tank can be lifted to a greater height (occasionally as little as 150mm (6inches)) by fitting a solid wood assistance under it - perhaps made up of struts as well as blockboards. If you choose this alternative, the major as well as distribution pipes will certainly additionally need to be elevated to fulfill the brand-new elevation of the reservoir.
Alternatively, a booster pump (a single pump or a dual/twin pump) can be fitted. Whichever kind is selected, it must be linked right into the power supply in order to operate.

Piping as well as Drainage

It is best to make use of 15mm size supply pipes, and also make the runs to the shower as short as well as straight as possible so regarding maintain optimal pressure as well as minimise warmth loss. Additionally, by reducing using elbow joints for pipe corners, you can decrease the resistance in the circulation of the water system. You can achieve this by bending the pipelines rather.

Most Common Errors

Going against or neglecting local code limitations.

Using pipelines that are as well small.

Affixing copper to galvanized without making use of a brass or dielectric suitable in between both.

Not making use of tape or pipeline substance at threaded joints.

Not leveling your components when installing them.

Not mounting an air space loading for fixtures.

Cutting supply stub outs also brief to mount the shutoff valves onto after the finished wall remains in area.

Not appropriately aligning tubes right into installations or quit valves. (Requiring the nut onto the compression ring at an angle when the tubes goes to an angle will certainly cause a leakage.).

When transforming the water back on in your home, always run the outdoors tube shutoff or flush your toilets to hemorrhage dirt as well as air from the lines. This debris can cause problems in your sink taps and other plumbing trim.

How Do You Install a Shower? Follow This Guide

Installing a Shower at a Glance

Tools & Materials: Level, electric drill, caulk, hole saw, cedar shims, shower unit

Step 1: Drill pilot holes

Step 2: Prep fixture holes

Step 3: Move unit into place

Step 4: Caulk corners and base

Step 5: Attach door

Step 6: Install shower pan

Whenever plumbing is involved in a DIY project, people worry about what might go wrong. The truth is that installing a shower isn’t that complicated, and you can save a lot of money by doing it yourself. You shouldn’t need to make any alterations to your plumbing to complete the job, and most of the tools you need will be provided in your new shower kit.

Can I Install a Shower Myself?

Even if you’ve never installed a shower before, you’ll find this to be a project that is perfectly suited for DIYers with a moderate level of experience. Whether you're doing a bathtub conversion or installing a new stall, most of what you need comes in shower kits that you can purchase from a hardware store. The first thing you need to do is determine what type of shower stall you want.

Single-panel stalls are the easiest to install because they come preassembled. All you need to do is put them in place. Multi-panel showers require a few additional steps, but you’ve got more control over the appearance of your unit. Multi-panel units are also much easier to handle if you’re going to do the installation without any help.

Be sure to take all appropriate safety precautions, such as wearing eye protection and gloves. When you’re removing or installing a shower unit, you might kick up debris that could hurt your eyes. You’ll also need to work with equipment that will get extremely hot, so be sure to have safety gloves handy.

Tools and Materials

2- to 4-foot level

Electric drill with a 1/8-inch drill bit

Caulk

2-inch hole saw

Cedar shims

The unit itself

Before You Begin: Prep the Space

It’s highly important to measure your space accurately before putting the stall in. Measuring from the floor upward and from each corner outward will ensure you’ve got the right measurements. What you’re looking for is where the plumbing apparatuses are going to come through the stall. Transfer these measurements over to the back of your unit by drawing the locations of these holes using a pencil or marker.

Pull out your old shower and make sure to scrape off all the old caulking. Be thorough because you want to work with smooth surfaces for the best installation. Once you’ve pulled out your existing shower, you need to make sure that the floor is clean and dry. The best way to clean debris is with a shop vacuum, as it’ll soak up water and dirt together.

If you’re experiencing any plumbing issues, such as low water pressure, this is a perfect opportunity to solve them. Make sure that the pipes themselves are not in need of patching and clean your showerhead. When you turn the water back on after your project, check the pipes for signs of wear or disrepair. Anything beyond minor repairs should be handled by a plumber, and this is the best time to bring in a professional.

If the floor has any moisture at all, don’t proceed until it’s completely dry. The last thing you need is for the floor to rot or invite mold and mildew into your base. Once everything is dry, apply waterproof wallboard to the walls. This can be attached with screws or nails, then sealed with caulk so that water doesn’t seep into any crevices.

https://www.homeserve.com/en-us/blog/how-to/install-shower/

Hopefully you enjoyed our excerpt on How to Install a Shower Enclosure . Thanks so much for finding the time to browse our content. In case you enjoyed reading our blog post kindly make sure you remember to pass it around. Many thanks for your time invested reading it.

Detail

Report this page